Latest News

Bertling Logistics is proud to share the story of another successful delivery by their Bertling team in Indonesia – a high-value shipment of five Short Block Gas Engines.

With a total value of EUR 1.25 million and each unit weighing 14 te, the engines were shipped from Austria to Batam, Indonesia.

The shipment was closely coordinated with Bertling’s colleagues from the Bremen office, resulting in a seamless operation and on-time, safe delivery to their client’s premises.

Timeline Logistics Solutions SAC, a Project Logistics Alliance member representing Peru, has once again demonstrated its capability in managing the transport of oversized equipment, even amid considerable challenges.

This latest operation required the lashing and on-time delivery of a massive machinery unit, nearly 5 meters in height, to a key client during an active inland truckers’ strike in Lima.

The initiative started at the Port of Callao, where Timeline Logistics Solutions received a special piece of equipment arriving from Asia in a 40-foot flat rack out-of-gauge (OOG) container. The machinery measured 4.72 meters in height, 4 meters in width, and weighed 19.3 metric tons. Due to the cargo’s substantial dimensions especially its width and height, the team opted to unload the equipment from the container, prioritizing safety and maneuverability.

The next critical step involved loading the cargo onto a specialized Lowboy truck, after which Timeline Logistics Solutions’ team expertly secured and lashed the machinery. Completing this procedure demanded patience and thorough consultation of technical schematics to ensure the unit was safely fastened for a long-distance journey.

The delivery covered 600 kilometers of overland transport to the client’s site. Multiple hurdles had to be addressed throughout the process. Managing cargo of this size required heightened coordination and meticulous planning to mitigate risks during handling and transit. Compounding the complexity was a citywide strike by truckers in Lima, which delayed the operational team and threatened to disrupt the delivery schedule.

A further challenge arose from Peruvian regulations prohibiting night transport of cargo taller than 4 meters, confining movement to daylight hours. Thanks to strategic timing and efficient execution, the team succeeded in departing Lima by 6:00 PM, just ahead of midnight onset of the strike.

Despite these obstacles, Timeline Logistics Solutions ensured the equipment reached its destination early the next day. The client commended the company for their professionalism and timely performance.

This project once again highlights Timeline Logistics Solutions’ expertise in handling complex, oversized shipments under adverse circumstances. The company’s commitment to planning, technical know-how, and effective response to external difficulties showcases its standing as a reliable partner for challenging logistics projects. Congratulations to the Timeline Logistics Solutions team for another exemplary delivery!

PCN UAE members, Fleet Line Shipping Services (FLS) successfully loaded a pilot boat last month.

The pilot boat measures 22.7 x 6.6 x 8.1m and weighs 75tn. It was shipped from Abu Dhabi to Africa.

The team of experienced professionals at Fleet Line Shipping Services offer bespoke solutions for complex logistics challenges with speed, accuracy and assurance.

The Norse Wind newbuild project has reached a significant milestone with the successful completion of its full height jacking test.

During this critical commissioning phase, the vessel’s leg was extended to its full length of 124 meters – approximately 91 meters above the seabed -demonstrating robust structural integrity and mechanical performance under simulated offshore conditions. This test is essential in validating the safety systems and alignment accuracy of the jacking equipment.

High standards were maintained throughout the preparation and execution of the test by GustoMSC, CIMC Raffles, and the DEME site team. Their commitment to safety, precision engineering, and collaboration was evident in the meticulous attention given to cleanliness, mechanical functionality, and system efficiency.

Norse Wind and its sister vessel Norse Energi are NG20000X-class WTIVs developed by GustoMSC. These state-of-the-art vessels have been designed to install wind turbines with rotor diameters measuring over 300 meters and XXL monopiles weighing up to 3,000 tons, even in water depths of up to 70 meters. Once operational, these vessels will be the most modern WTIVs in the industry.

The vessels Norse Wind and Norse Energi are expected to be delivered in the fourth quarter of 2025 and early 2026 respectively, and they will feature the iconic DEME green hull.

Hanau has been an important hub for regional and national logistics since 1925.

This year, one of the Rhenus Group’s oldest locations is celebrating its 100th anniversary – a milestone that has been marked with special events.

Hanau is one of the Rhenus Group’s most traditional locations. Several anniversary events were held to mark the occasion: First, there were boat trips on Rhenus’ own excursion boat, the Möwe, for customers. Separately, employees were also invited to take their own trips on the Möwe, followed by a party right at the port. The trips offered a special view of the port area from the water, and the employee event provided a social gathering in a summery atmosphere.

The Rhenus site in the port of Hanau is now a versatile logistics location with a direct rail connection and its own shunting locomotives. Fertilizers, building materials, minerals, metals, glass products, heavy goods and mineral residues are handled on approximately 80,000 m² of open storage space and 27,000 m² of covered storage space. Modern facilities for drying, screening, bagging, palletizing and silage complement the infrastructure. In addition to its storage and transshipment business, the site is characterized by its trade in building materials and power plant residues, as well as the production of blasting media.

Vestas has received a 274 MW order from EDF power solutions North America to supply 25 EnVentus V162-6.0 MW wind turbines and 20 EnVentus V162-6.2 MW wind turbines for the Madawaska wind project in Québec, Canada including a 10-year Active Output Management (AOM) 5000 service agreement.

Once operational, Madawaska will provide clean and secure energy to tens of thousands of Québec homes while supporting local job creation and industrial development.

The 274 MW Madawaska order follows the recently announced 124 MW EnVentus order with EDF power solutions for the Haute-Chaudière wind project, also in Quebec.

“We’re excited to continue our growing partnership with EDF power solutions North America and the Madawaska project once again highlights the power of collaboration, where proven supply chain expertise meets world-class technology,” said Laura Beane, President, Vestas North America. “Through continued investment in Quebec’s energy future, collectively we are helping pave the way for large-scale renewable development. With Hydro-Quebec targeting 10 GW of wind capacity by 2035, momentum is building and it’s through partnerships like this one that we are preparing to make the province’s bold vision a reality.”

“Madawaska Wind, the second of three projects awarded by Hydro-Quebec through its call for tenders, serves as a testament to the strength of our collaboration with Vestas,” said Tristan Grimbert, President and CEO of EDF power solutions North America. “As the Madawaska project moves forward, we are committed to leveraging these strong partnerships to continue to make a meaningful impact on Quebec’s energy future.”

Vestas is a leader in Canada’s onshore market, with an installed base of over 5 GW spanning all 10 provinces and a supply chain supported by more than 300 local suppliers. In Québec, Vestas currently services 428 MW of operating turbines and last year, announced a further 347 MW order that is currently under construction.

“Quebec presents unique logistical and execution challenges, but our long-standing, and growing, experience in the region means we’re well positioned to navigate them,” said Josh Irwin, Senior Vice President, Canada Onshore Sales, Vestas North America. “By bringing together local know-how and strong partnerships with regional stakeholders, we’re prepared to help bring this project to life while creating new economic opportunities for the province.”

As part of a shared commitment to strengthen local manufacturing and job creation, EDF power solutions and Vestas have partnered with Québec-based Marmen as the tower supplier, supporting 150 direct jobs in Matane.

“Marmen is proud to work with two industry leaders to highlight the importance of a Canadian-based supply chain amid strong market signals. We are ready to help mature this market alongside Vestas and EDF power solutions,” said Patrick Pellerin, President, Marmen.

Delivery of the turbines is expected to begin in the third quarter of 2026, with commissioning scheduled for the fourth quarter of 2027.

Gruber Logistics are excited to announce a significant step on their journey toward a more inclusive work environment.

GRUBER Logistics SpA has received certification for its Gender Equality Management System, compliant with the UNI/PdR 125:2022 standard!

To achieve their goals, they’ve already taken important steps: A Steering Committee for Equal Opportunities has been established to guide and monitor gender equality initiatives.

They’ve introduced a Strategic Plan for Equality with clear objectives, making their efforts measurable and transparent.

For critical situations, a confidential channel for reporting harassment and discrimination is now in place to ensure every voice is heard and appropriate action can be taken.

Regular training sessions on respect, harassment prevention, and equality are strengthening awareness and fostering a culture of mutual understanding.

Gruber firmly believe that together they can create a safe, fair, and appreciative work environment for everyone. This certification is a crucial step in that direction and strengthens our commitment to being a leader in gender equality.

Altius has completed the second phase of the transportation of a 196-ton transformer to the Valle Solar Photovoltaic Plant.

After its arrival by sea from Shanghai to the port of Valencia, the cargo was transported by rail to Almansa and then moved by road in different stages to the substation in Ayora. One of the sections required a night operation with total traffic cut-off due to its technical complexity.

For installation, a gantry was used to unload the transformer onto a shoring system that allowed it to be accurately positioned on its foundation. Once in place, the operation was completed by crawling.

This type of logistics project requires a high level of planning and technical coordination.

First Look Solutions S.R.L., a subsidiary of Rezolv Energy, has placed a 269 MW order with Vestas to complete the second phase of Vifor wind farm in Buzău Country, Romania.

Once both phases are fully operational, the Vifor project will become the largest wind farm in Romania and one of the largest onshore wind farms in Europe, with a total capacity of 461 MW.

The phase II order includes 42 V162-6.4 MW turbines of the EnVentus platform. Vestas will also provide long-term service for the project through a 15-year Active Output Management 5000 (AOM 5000) agreement.

“We are delighted to contribute to Romania’s energy transition through the realisation of the country’s largest wind farm. Vestas continues to lead the market thanks to our strong local infrastructure, including five service hubs and a regional training center,” states Srdan Cenic, Vestas Mediterranean East General Manager.

Alastair Hammond, CEO, Rezolv Energy, said: “Rezolv’s Vifor wind farm is an iconic project which is helping to position Romania at the forefront of Europe’s clean energy transition. From the start, the project has been designed to ensure the maximum possible reduction in emissions, and the 6.4 MW turbines from Vestas – the most powerful ever installed in Romania – will be crucial in delivering this impact.”

Turbine delivery for phase II is planned for the second half of 2026, with commissioning scheduled for the second half of 2027. Vifor phase I is currently under construction, with Vestas providing full engineering, procurement, and construction (EPC) solutions, along with 30 V162-6.4 MW turbines.

Vestas has played a key role in advancing wind energy in Romania since entering the market in 2009. With nearly 2 GW of capacity either installed or under construction, Vestas is currently the leading wind OEM in the country. The company’s Eastern European regional headquarters is located in Bucharest and employs over 550 people across Romania, including a highly skilled team of service technicians supporting ongoing projects.

The Bilbao Port Authority is to invest 534,052 euros to replace the refrigeration equipment in the existing chambers and loading bays at the Border Control Post, including both the condensing units located on the roof and the evaporators inside the chambers and in the false ceiling of the building’s loading bays.

The company in charge of this refurbishment will be GIROA, S.A.U., having signed the corresponding contract resulting from the public tender.

The outdoor units will be reorganised in two rows close to the enclosure that forms the first floor on the roof, and the chambers will be equipped with temperature recorders and gas leak alarm detectors. The works are due to run for four months, with completion scheduled for October 2025.

The surface area available and the resources it provides for logistics makes the Border Control Post of the Port of Bilbao one of the most advanced among Spanish ports. It is divided into two separate areas: one, administrative, and the other, for inspection purposes. The large inspection area is equipped with 15 loading/unloading bays and resources for industrial cold storage, thermal insulation and easy-to-clean, resistant and durable finishes, designed to ensure optimum conditions for fruit and vegetable logistics at all times.

The Bilbao Border Control Post provides all the necessary authorisations for the control of products of animal and non-animal origin, animal feedstuffs, vegetables, plant products and wood and its products. The Port of Bilbao also uses a telematic platform (e-puertobilbao) for operational coordination between all the different players involved, including customs agents, inspectors from the corresponding inspection service, tax inspectors and transporters, thereby effectively providing a one-stop shop at the Border Control Post.

PLA are pleased to introduce B-Green Logistics (Philippines) Inc., representing the Philippines, as the newest member of the Project Logistics Alliance community.

B-Green Logistics (Philippines) Inc. is a dynamic logistics company established in Muntinlupa, Philippines, with a mission to deliver innovative, eco-conscious logistics solutions that connect global markets efficiently while reducing environmental impact. B-Green Logistics has established a reputation for reliability, sustainability, and exceptional service, backed by a team of seasoned professionals with in-depth expertise in freight forwarding and supply chain management.

B-Green Logistics provides comprehensive solutions for complex and large-scale transportation challenges. The company supports industries such as construction, renewable energy, infrastructure, and manufacturing by offering end-to-end management of oversized and heavy-lift cargo. From route surveys and securing permits to operating an in-house crane fleet and providing onsite installation services, B-Green Logistics ensures the safe and efficient handling of critical project components, including wind turbines, industrial machinery, and equipment for major infrastructure developments.

Key Services: Project Logistics – Complete management for oversized and heavy-lift cargo, route surveys, permit acquisition, in-house crane operations, and onsite installation; Ocean Freight – FCL and LCL services; Dedicated routes across Asia-Europe, Trans-Pacific, and Intra-Asia lanes, utilising low-emission vessels and offering carbon offset programs; Air Freight – Door-to-door and airport-to-airport solutions for critical shipments, including pharmaceutical, automotive, high-value, and temperature-controlled cargo, with real-time tracking capabilities; Customs Clearance – End-to-end export and import clearance, including HS code classification, duty optimisation, and compliance support.

ABL proudly marks a significant milestone this week as its Nigeria office celebrates 15 years of dedicated service to the country’s energy and maritime industries.

Since its establishment in 2010, ABL Nigeria has grown from a local presence into a trusted partner in some of the nation’s most transformative offshore and infrastructure projects.

Founded as LOC Nigeria under the leadership of Philip Atitebi, the Lagos-based office has evolved into a key regional hub for ABL’s global operations. Over the past decade and a half, the team has delivered expert marine and engineering consultancy, marine warranty surveying, and risk services across Nigeria’s offshore oil and gas landscape.

“It has been an honour to support Nigeria’s energy and maritime sectors with dedication, expertise, and integrity. Our journey has always been defined by partnerships, with our clients at the heart of every milestone.” Philip Atitebi, ABL Managing Director for Lagos.

A standout example of ABL Nigeria’s impact is its involvement in the Egina Field Development, located in Oil Mining Lease (OML) 130, approximately 200 km offshore from Port Harcourt. The project, operated in ultra-deep waters (1150–1750m), includes: A Floating Production Storage and Offloading (FPSO) unit with a capacity of 208,000 barrels per day and 2.3 million barrels of oil storage; A Subsea Production System (SPS) and Umbilicals, Flowlines, and Risers (UFR) connecting 44 subsea wells; An Offshore Loading Terminal (OLT) located 2 km from the FPSO.

ABL provided marine warranty and engineering services throughout the project lifecycle, supporting local content development by overseeing the construction and integration of FPSO modules in Nigeria.

In recent years, ABL Nigeria has continued to deepen its local engagement. In 2025, the team hosted its first delegation at SAIPEC and launched new initiatives with the Port of Lagos, reinforcing its commitment to local content and capacity building.

“These achievements are not ours alone, they are shared with our clients, partners, and the wider Nigerian energy community,” Philip added. “We look forward to the next 15 years of partnership, progress, and purpose in Lagos and beyond.”

As ABL Nigeria celebrates this anniversary, it does so with gratitude for the trust placed in its team and with a renewed commitment to supporting the nation’s energy future.

The Rhenus Group today announced three strategic leadership appointments that will play a pivotal role in driving the company’s next phase of growth, innovation, and regional integration.

These appointments are part of a broader transformation within the Air & Ocean division of the Rhenus Group, aimed at aligning leadership with evolving market dynamics and strengthening the company’s ability to deliver customer-centric solutions across key geographies.

Effective August 1, 2025, Joachim Hanssen has assumed the role of Chief Executive Officer, Asia Pacific (APAC). Joachim will also oversee Greater China, Central Asia & Turkey as part of his scope of work. With over two decades at Rhenus, Joachim has been instrumental in expanding the company’s footprint across Asia. His leadership has been marked by operational excellence, cultural fluency, and a strong focus on regional growth. Joachim’s appointment positions Rhenus to unify and scale its APAC operations with greater strategic cohesion.

Effective October 1, 20205, Alberto Martinez will take on the role of Chief Executive Officer, Europe (EU). Currently serving as Vice President Global Ocean Freight, Alberto has led the development of Rhenus’ global ocean freight strategy, expanded trade lanes, and built strong carrier partnerships. His leadership has built up a global ocean freight structure, driven commercial growth and strengthened Rhenus’ position as a global ocean freight forwarder. Alberto is well positioned to lead the European region, one of Rhenus’ most complex and strategically vital markets, into the next phase of development. Alberto will succeed Markus Lingohr, who will retire in 2026, with a structured transition already underway.

Rhenus is pleased to announce the appointment of Renee Toh as Vice President Global Ocean Freight, effective September 25, 2025, succeeding Alberto Martinez.

Renee brings over 20 years of global experience in ocean freight and trade management, with a strong track record in leading cross-functional teams and delivering commercially driven solutions. Prior to joining Rhenus, she covered the position as Head of Global Ocean Freight Procurement at CEVA Logistics, where she played a key role in optimizing procurement strategies and enhancing global carrier partnerships.

Her appointment underscores Rhenus’ commitment to strengthening its global product strategy and enhancing service delivery across international trade lanes.

The newly appointed leaders bring deep expertise, global perspective, and proven track records in building high-performing teams and scalable logistics solutions. Their new roles reflect Rhenus Group’s commitment to investing in leadership that can translate global strategy into regional execution.

“These leadership appointments reflect our long-term vision to build a more agile, integrated, and customer-focused organization. By placing experienced leaders in strategically critical roles, we are reinforcing our ability to respond to market shifts, deepen customer relationships, and unlock new opportunities across regions,” said Jan Harnisch, Member of the Board – Air & Ocean. “Rhenus is pleased to announce the new appointments of Joachim and Alberto, and to welcome Renee as member of the Rhenus family, wishing each of them continued success and fulfillment in their respective roles. Their experience will be instrumental in driving our next phase of growth and integration across regions.”

Total Movements Pvt. Ltd, member to the Worldwide Project Consortium (WWPC) in India, had to overcome significant logistical and environmental challenges for the Door-to-Port complex movement of a 375 ton oversized Vacuum Tower, from the western to the eastern coast of India.

A company project team leader explained: “Our comprehensive logistics scope included picking up the cargo from supplier’s works, transporting it to the load port on the western coast, coastal shipping to the discharge port on the eastern coast of India, and managing the discharge process.

Key highlights of this challenging operation include: Opted for Multimodal (Road + Coastal) shipping to bypass geographical and infrastructural constraints; Critical oversized cargo dimensions of 55.73 x 10 x 9.45 meters; Customized transport configuration and mobilized suitable equipment to adhere to weight and space restrictions at the load port; Obtained 16 electric line shutdowns along the route, enabling smooth passage without compromising safety
Major civil works at critical turning points, including deploying 100+ steel plates to stabilize weak sections and ensure safe manoeuvring; Mitigated weather impacts as the movement was conducted in monsoons; Chartering a Super Heavy Lift vessel and converting it to an Indian-flagged vessel for coastal shipping; Executed seamless double banking operations at the discharge port under stringent Marine Warranty Surveyor supervision.

These engineered solutions are a testament to our team’s commitment, agility, and technical expertise in executing complex multimodal logistics with precision.

We extend our heartfelt thanks to all stakeholders for their unwavering support in making this complex project a success.”